@Ashmeet Happy to hear
I Looked at the modem type the neighbour has. There are two difference between you and the neighbours; WPA2/WPA3 security and Wifi6.
Since the tried the WPA2 trick @Waqqas mention without result the only thing is the Wifi6.
I disabled the Wifi6 (802.11AX). Under Home Networking - Wireless - Others - 802.11 Mode.
You are now running on Wifi5 (802.11AC) just like the neighbours. Im thinking that the network card in your laptop have some troubles with AX wifi networks. You check with intel whether a driver update is needed to fix that if you want. But as long as you don't have any Wifi6 clients there is no disadvantage for you. Just keep it in mind to change it back when you upgrade to Wifi6 clients :)
@Sven-TMT - Thanks a lot for helping out and proving the solution.
@Waqqas @Cal - Appreciate your help as well. Thank you!
@Waqqas Your Welcome!
Its just like the WPA2/WPA3 Transition mode. Some devices and network card don't like it .
I would recommend trying these two options before splitting the SSID (Personally) .
@Sven-TMT
Good to know that because others are having the exact same issue but disabling WiFi 6 was never tried
@Sven-TMT - Its working now. I can connect my laptop to the wifi but the speed is considerably reduced (from 400 to 80) .Can you check this also pls
@Cal - Thanks for sharing the link.
I had already tried most of the stuff but i still went through it and tried all methods from 11 to 14.
Still no luck.
Long shot, since I do see other TMNL networks - is possible to compare the what's the difference in the router settings for these networks ? If yes, how can I share these details
@Sven-TMT - Thanks a lot for helping out and proving the solution.
@Waqqas @Cal - Appreciate your help as well. Thank you!
Happy to help :)
@Sven-TMT - Its working now and seems to be fixed. Please keep it this way :)
Would like to monitor the speed/connectivity for next 24 hrs before considering this resolved.
Can you share what changes you made to fix connectivity ?
@Ashmeet Due to the changes we made the clients where connected to the 2.4Ghz instead of the 5Ghz. I forced them to switch (disabled the 2.4ghz for a sec) i can now seem them on the 5Ghz. Can you check again.
Hi @Ashmeet,
We made some small changes can you check wheter you can see the network now?
If not it might be indeed hulpfull to share the TMNL- networks you can see on the laptop. Please sent them in a private message to me or @Lisa
Hello @Ashmeet
Can you browse to 192.168.1.1, login with admin and the Login Password behind the Zyxel and turn off 5 GHz under WiFi instellingen?
Try to connect the laptop again.
Hey @Ashmeet,
Thanks for the detailed information that you’re posting!
It seems that the usual tips don’t work. I would love to give you advanced tips but this site is both better in explaining as well as visualizing them: Softwaretestinghelp.com Wifi tips. Especially from method 10 onward it seems to get quite thorough in the investigation of why your laptop cannot connect to the Wifi.
I hope for you and I am curious to hear if the tips helped you out!
@Waqqas
Yes, 5Ghz is still disabled. I did try multiple options, see below. But issue still exists.
WPA3-SAE/WPA2-PSK (selected) - works for some laptops
WPA2-PSK - works for some laptops
WPA3-SAE - wifi signal is not shown in available network for all laptops.
@Ashmeet
Is 5 GHz still disabled? Otherwise go back to WPA2/WPA3, sometimes it works.
@Waqqas - Indeed, its T54.
And, I changed it to WPA2-PSK but its still not showing in the list of available network.
So, issue still exists
@Ashmeet
Select WPA2-PSK then and it should work. You have the Zyxel-T54 then and not the Zyxel-T50.
@Waqqas
There is no “geen” as an option. I only see 3 items in the drop down :
WPA3-SAE/WPA2-PSK (selected)
WPA2-PSK
WPA3-SAE
@Ashmeet
And when you log in to the Zyxel interface, go to the menu, netwerkinstellingen, draadloos, scroll down to beveiligingsmodus and choose geen, click on toepassen and try to connect the laptop again.
Afterwards you can select WPA2-PSK again, it's just for a test.
hi @Waqqas ,
Just turned off 5 Ghz but the issue still exists.